Surfboards

Designed and shaped specifically for the Great Lakes by Wax Surf Co. 

Speed, control, and flow are the key concepts applied to this board. Its width, volume, and rocker make it perfect for smaller waves, yet the pulled-in tail allows for sharp top-to-bottom turns. Typically ridden as a twin, the board is reminiscent of a traditional fish but a single concave leading to deep double-V allow the board to plane and generate speed in dicey sections. The nose is very foiled out unlike most fish shapes to keep the front agile, skatey and playful.

SPECIFICATIONS:

WAVE HEIGHT:

- Knee to Head High

SKILL LEVEL:

- Beginner/Intermediate to Advanced 

Designed and shaped specifically for the Great Lakes by Wax Surf Co. 

Speed, control, and flow are the key concepts applied to this board. Its width, volume, and rocker make it perfect for smaller waves, yet the pulled-in tail allows for sharp top-to-bottom turns. Typically ridden as a twin, the board is reminiscent of a traditional fish but a single concave leading to deep double-V allow the board to plane and generate speed in dicey sections. The nose is very foiled out unlike most fish shapes to keep the front agile, skatey and playful.

SPECIFICATIONS:

WAVE HEIGHT:

- Knee to Head High

SKILL LEVEL:

- Beginner/Intermediate to Advanced

Designed and shaped specifically for the Great Lakes by Wax Surf Co. 

Speed, control, and flow are the key concepts applied to this board. Its width, volume, and rocker make it perfect for smaller waves, yet the pulled-in tail allows for sharp top-to-bottom turns. Typically ridden as a twin, the board is reminiscent of a traditional fish but a single concave leading to deep double-V allow the board to plane and generate speed in dicey sections. The nose is very foiled out unlike most fish shapes to keep the front agile, skatey and playful.

WAVE HEIGHT:

- Knee to Head High

SKILL LEVEL:

- Beginner/Intermediate to Advanced

Bob is a machine for crushing mush, with flair. Low entry rocker gets you in early, a speed pedal under your front foot gets you moving quick and a curvy last 6” allows you to surf more vertically than you would expect from similar boards. Can’t afford a longboard? Let Bob keep you stoked on those days where you just want to get wet no matter the size. 

SPECIFICATIONS:

- 5’10, 22", 2 3/4",
- 39.9 Litres
- Five fin setup
- Carbon wrap
- Round tail
- Futures fins
- PU/Poly

WAVE HEIGHT:

- Knee to Head High

SKILL LEVEL:

- Beginner/Intermediate-Advanced

"A radical small wave design based on maximum surface area for lift, stability and unbridled speed in tiny surf. Inspired by the original “double ender” Bean Bag, Lib Tech’s “Freak Flag Bean Bag” features a refined, winged outline for tighter turns, added bite and faster transitions rail to rail. Tip-to-tail vee bottom, for forgiveness and on rail surfing in the smallest of waves. It also features a flat (low center of gravity) and stable deck, with forgiving rails. This board is meant to be surfed very short. Unlike most extremely wide and short boards, it has the ability to be surfed aggressively from the tail, and up onto a rail, without sliding out... Get off the Couch, toss your LazyBoy and fly your Freak Flag!" ~ Matt Biolos 
*Fins NOT Included 

BOARD SPECS

B-Grade beauties have mild cosmetic imperfections that DO NOT impact the board structure, performance, or longevity. B-Grades come with the full factory warranty. We can't guarantee the specific cosmetic oddity that you will be getting, but we can guarantee the amazing price and handcrafted performance.

All fun up front. and business in the back, the Stuhb is guaranteed to pack a fun-filled punch on the lakes. A nice full nose makes getting in early a breeze, a real must in a mush crusher, while the relatively narrow tail gives it a good range. Concave under your front foot keeps you moving down the line quick and takes the focus away from generating speed. If you are stepping down from a Slim Jim, or just looking to ride a shorter board that keeps your wave count up, the Stuhb is it.

SPECIFICATIONS:

- 6'0" x 22 1/4" x 2 3/4 (40L)

- Thruster fin setup (Futures)

WAVE HEIGHT:

- Waist to Overhead

SKILL LEVEL:

- Beginner to Advanced

This board features a concave bottom that transitions to vee in the tail. The wide outline makes for easy wave catching and down the line glide and stability. The concave bottom adds lift and increased rail curve, which allows radical top to bottom surfing. The straight rail line & vee in the tail keep the board moving forward and hold in during hard carving maneuvers.

 ...LOST logos come in different colorways based on size.

*Fins NOT Included

WAVE HEIGHT:

- Knee to Head High

SKILL LEVEL:

- Beginner/Intermediate to Advanced

SPECIFICATIONS:

We love surfing and surfboards but... traditional surf construction is delicate and the build process is toxic and unhealthy… we knew there had to be a better way. 12 years ago, Mike Olson set out to make a stronger, longer lasting more environmentally friendly surfboard. He applied his 30 plus years of experience handcrafting and riding high performance composite surf, skate and snowboards to the task. In the process, he completely rewrote the book on surfboard construction. Each of the 31 pieces used to construct our ECO IMPACTO surfboards are new materials to the surf industry. Our unique Thermo Pressure Fusion Process creates an amazingly durable, environmentally friendly, high performance surf structure that frees your mind and lifts your surfing to new heights.

All of our boards are handcrafted in the USA near Canada.

B-Grade beauties have mild cosmetic imperfections that DO NOT impact the board structure, performance, or longevity. B-Grades come with the full factory warranty. We can't guarantee the specific cosmetic oddity that you will be getting, but we can guarantee the amazing price and handcrafted performance.

This board features a concave bottom that transitions to vee in the tail. The wide outline makes for easy wave catching and down the line glide and stability. The concave bottom adds lift and increased rail curve, which allows radical top to bottom surfing. The straight rail line & vee in the tail keep the board moving forward and hold in during hard carving maneuvers.

 ...LOST logos come in different colorways based on size.

*Fins NOT Included

WAVE HEIGHT:

- Knee to Head High

SKILL LEVEL:

- Beginner/Intermediate to Advanced

SPECIFICATIONS:

We love surfing and surfboards but... traditional surf construction is delicate and the build process is toxic and unhealthy… we knew there had to be a better way. 12 years ago, Mike Olson set out to make a stronger, longer lasting more environmentally friendly surfboard. He applied his 30 plus years of experience handcrafting and riding high performance composite surf, skate and snowboards to the task. In the process, he completely rewrote the book on surfboard construction. Each of the 31 pieces used to construct our ECO IMPACTO surfboards are new materials to the surf industry. Our unique Thermo Pressure Fusion Process creates an amazingly durable, environmentally friendly, high performance surf structure that frees your mind and lifts your surfing to new heights.

All of our boards are handcrafted in the USA near Canada.

Magically fast surf skate "twin" shape small to medium wave accelerator.

Magically fast, short, wide, lowest rocker series with a speedy Horsepower thumb tail and flipped full nose. A surf skate for aerials, acceleration and spinning in small to medium waves..

• Radically Different

30 years of experience crafting and riding high performance environMENTALLY friendly composite surf, skate and snowboards went into designing our unique waterboard process, materials and shapes. Each of the 31 pieces used to construct our surfboards are new materials to the surf industry.

• Environmentally Nicer

100% closed cell foam won’t absorb water... won't rot • More durable: Lasts longer, less dings, less boards in landfills • Recycled foam core: up to 50% recycled content in blank • Blank scraps all recycled • Elimination of hazardous resin systems • Non ozone depleting blowing agent • Basalt fiber: no additives, no boron • No solvents except water • No paint brushes • No sandpaper, no tape

• DIMENSIONS: 5'7 x 20.8 x 16.75

   

• VOLUME: 29.6L

   

• TAIL: Round

   

• FIN CONFIGURATION: Tri-Quad

   

• FINS: FCS II and 2 Tab Compatible

   

• CONSTRUCTION: MBC

   

• SURFBOARD TYPE: Shortboard

   

Construction

Magnesium Basalt Carbon Construction 
Lib Tech MBC construction perfectly blends the best characteristics of epoxy: durability and liveliness with the best performance characteristics of polyester: flex and dampness. The addition of magnesium fiber improves the overall impact resistance, and the carbon composite stringer exactly matches the flex of new high-performance polyester and holds it for the life of the board. The world’s best surfboard construction just got even better!

Modern shortboard shape focused on speed and paddling, features deep single concave shifting to subtle double, slightly more rocker than the board suggests for lively feeling on wave.

SPECIFICATIONS:

- 5’10" x 20" x 2 1/2" (31.8L)

- Thruster fin setup

- Squash tail

- PolyU/Poly build

WAVE HEIGHT:

- Waist to Overhead

SKILL LEVEL:

- Intermediate to Advanced

The perfect blend of fish speed and shortboard control with a serious range sums up the Analog perfectly. Maybe not an absolute groveler but a board that works well from hip to well overhead. We don’t really believe in one board quivers, but this is as close as it gets.

SPECIFICATIONS:

- 5'11" x 20 1/8" x 2 1/2" x (32.8L)

- Thruster fin setup (Futures)

WAVE HEIGHT:

- Waist to Overhead

SKILL LEVEL:

- Intermediate to Advanced

The perfect blend of fish speed and shortboard control with a serious range sums up the Analog perfectly. Maybe not an absolute groveler but a board that works well from hip to well overhead. We don’t really believe in one board quivers, but this is as close as it gets.

SPECIFICATIONS:

- 6'0" x 20 1/4" x 2 9/16" (33.7L)

- Thruster fin setup (Futures)

WAVE HEIGHT:

- Waist to Overhead

SKILL LEVEL:

- Intermediate to Advanced

 "The Hydra is the most advanced small wave board I have ever created! It melds more than 25 years of small wave fish and mini wave hybrids. Built around an overall low rocker paired to an almost traditional “fish” outline featuring a “locked in” snowboard influenced sidecut outline, speedy forgiving double concave chined 'Hydra-hull', a rail shortening bite increasing split diamond tail and a flat-ish deck with forgiving rails adds flexibility and allows radical surfing with wide tails." - Matt Biolos

The Astro Pop is designed to give you some extra spark and easy paddle in weaker, slower waves, while still keeping a performance edge and super fun to ride in good surf. Built off of the Astro, the retro fish weʼve been making for years, the Astro Pop has a more pulled in nose and tail, with a little wing to help pull in the last 4 inches of the tail which creates a lot of curve in the outline, adding maneuverability without sacrificing any speed. The bottom has a deep double concave running through to veer off the tail which makes the board get up on top of the water in even slower, weaker waves and still easily tip over onto the rail at high speeds.

A mild beak nose helps keep the thickness up into the nose, but itʼs not overly chunky, more like a daily driver type board but with easy paddling aided by the flatter entry rocker. We recommend the Astro Pop as a quad, for speed, but it comes stock with a 5-fin setup to maximize versatility.

SPECIFICATIONS:

- 5'11 x 20 1/8 x 2 1/2  Volume 33.5L

- Futures 5 Fin Setup

- Glassing Schedule 6oz + 4 oz / 6 oz

- Carbon Patch: Standard Carbon Tail

WAVE HEIGHT:

- Knee to Head

SKILL LEVEL:

-Beginner/Intermediate to Advanced

The Astro Pop is designed to give you some extra spark and easy paddle in weaker, slower waves, while still keeping a performance edge and super fun to ride in good surf. Built off of the Astro, the retro fish weʼve been making for years, the Astro Pop has a more pulled in nose and tail, with a little wing to help pull in the last 4 inches of the tail which creates a lot of curve in the outline, adding maneuverability without sacrificing any speed. The bottom has a deep double concave running through to veer off the tail which makes the board get up on top of the water in even slower, weaker waves and still easily tip over onto the rail at high speeds.

A mild beak nose helps keep the thickness up into the nose, but itʼs not overly chunky, more like a daily driver type board but with easy paddling aided by the flatter entry rocker. We recommend the Astro Pop as a quad, for speed, but it comes stock with a 5-fin setup to maximize versatility.

SPECIFICATIONS:

- 5'11 x 20 1/8 x 2 1/2  Volume 33.5L

- Futures 5 Fin Setup

- Glassing Schedule 6oz + 4 oz / 6 oz

- Carbon Patch: Standard Carbon Tail

WAVE HEIGHT:

- Knee to Head

SKILL LEVEL:

-Beginner/Intermediate to Advanced

The Astro Pop is designed to give you some extra spark and easy paddle in weaker, slower waves, while still keeping a performance edge and super fun to ride in good surf. Built off of the Astro, the retro fish weʼve been making for years, the Astro Pop has a more pulled in nose and tail, with a little wing to help pull in the last 4 inches of the tail which creates a lot of curve in the outline, adding maneuverability without sacrificing any speed. The bottom has a deep double concave running through to veer off the tail which makes the board get up on top of the water in even slower, weaker waves and still easily tip over onto the rail at high speeds.

A mild beak nose helps keep the thickness up into the nose, but itʼs not overly chunky, more like a daily driver type board but with easy paddling aided by the flatter entry rocker. We recommend the Astro Pop as a quad, for speed, but it comes stock with a 5-fin setup to maximize versatility.

SPECIFICATIONS:

- 6'0 x 20 1/4 x 2 1/2  Volume 35L

- Futures 5 Fin Setup

- Glassing Schedule 6oz + 4 oz / 6 oz

- Carbon Patch: Standard Carbon Tail

WAVE HEIGHT:

- Knee to Head

SKILL LEVEL:

-Beginner/Intermediate to Advanced

The PJHP is a souped up, slimmed down, refined PJ. It features a pulled in nose with the wide point brought back, and a narrower pulled in tail block. The outline enables the PJHP to surf more like a normal board-a very playful board that’s easy to paddle and ride yet it still allows more radical and quick turns than any other PJ models. Stand on the tail of this thing and go to town like you have a motor in small surf!
*Fins NOT included

The Phantom is a Ghost squashed down, souped up, and with added volume, great for your everyday sessions in less than epic conditions. We left the same Ghost rocker but added more single concave to flatten it out through the center, helping to create speed and flow without taking away from the overall performance or feel of the original design. The added width in the tail and nose create a more parallel, fuller outline that helps keep speed up through slower sections and tight turns. The rails are full but not chunky, giving you more flotation and speed without taking away the sensitivity that we all love in our boards.

SPECIFICATIONS:

WAVE HEIGHT:

- Waist to Overhead 

SKILL LEVEL:

-Intermediate to Advanced

No matter if the waves are big or small or your take off is early or late, this all around cruiser packs a surprising punch adapting to all sorts of conditions. From the rounded nose through the low rocker to the rounded pin tail this midlength board provides smooth glides and fast turns. Added volume under the chest makes for easy paddling that helps to catch more waves.

Outline: The longboard in the front. shortboard in the back outline with a vee tail that starts tapering 2/3 of the way through the board turns on a dime. The rounded nose allows you to ride towards the front of the board which stays pretty flat through the low rocker to provide speed down the line.

Rocker: The low rocker gives the board plenty of contact with the water to maintain speed countered by a subtle lift in the tail for fast transitions.

Bottom Contours: A flat entry turns to a slight vee that becomes more pronounced out the tail will give the rider ample control for rail to rail transitions.

Tail: The rounded pin tail has a nice amount of kick to it to provide additional speed and fast transitions.

• Core: PU
• Construction: PU
• Glass: 6x4x4/6x4
• Finish: Gloss

SPECIFICATIONS:

- 7'0" x 21 13/16" x 2 7/8"
- 2+1 Futures Fins
- PU/poly construction
- Pintail
- 48.5L

WAVE HEIGHT:

- Ankle to Shoulder High

SKILL LEVEL: 

- Beginner to Advanced

No matter if the waves are big or small or your take off is early or late, this all around cruiser packs a surprising punch adapting to all sorts of conditions. From the rounded nose through the low rocker to the rounded pin tail this midlength board provides smooth glides and fast turns. Added volume under the chest makes for easy paddling that helps to catch more waves.

Outline: The longboard in the front. shortboard in the back outline with a vee tail that starts tapering 2/3 of the way through the board turns on a dime. The rounded nose allows you to ride towards the front of the board which stays pretty flat through the low rocker to provide speed down the line.

Rocker: The low rocker gives the board plenty of contact with the water to maintain speed countered by a subtle lift in the tail for fast transitions.

Bottom Contours: A flat entry turns to a slight vee that becomes more pronounced out the tail will give the rider ample control for rail to rail transitions.

Tail: The rounded pin tail has a nice amount of kick to it to provide additional speed and fast transitions.

• Core: PU
• Construction: PU
• Glass: 6x4x4/6x4
• Finish: Gloss

SPECIFICATIONS:

- 7'2" x 22" x 2 13/16"
- 2+1 Futures Fins
- PU/poly construction
- Pintail
- 48.59L

WAVE HEIGHT:

- Ankle to Shoulder High

SKILL LEVEL: 

- Beginner to Advanced

Matt and Kolohe’s good times hometown project. The wave catching and speed of a fish meets the high performance desires of one of the world’s best performance surfers. The Exacta is Kolohe’s playful fun board when he gets off his contest blades and wants to cut loose... the normal dims are yours and my fishy high performance stick when the surf gets good and we get off our Bags and Jumpers.

*Fins NOT included

The Summertime features a low nose entry rocker for easy paddling and trimming down the line. It has a single concave bottom with a pulled in squash tail that allows the rider to surf off the tail. It also features a wider nose than your normal fun board which gives you the ability to ride the nose. The Summertime is a great for all conditions from those smaller summer days to overhead surf. This is a must have board for your your quiver!

Outline: A rounded nose and a wider body than your classic funboard give this board plenty of stability with a nice sized sweet spot. The wide point is pushed far forward for a lot of stability. The rails taper in nicely to a thumb tail that's a combination of a squash and round tail.

Rocker: The low rocker is flat enough for nose rides. offers great stability. and plenty of lift to reduce pearling. It's going to help get you into a lot of waves.

Bottom Contours: A single concave all the way through the board gives you plenty of bite for a nice. controlled cruise.

Tail: The thumb tail provides just enough hold leaning more towards a fast and loose feel.

• Core: PU
• Construction: PU
• Glass: 6x4x4/6x4
• Finish: Gloss

SPECIFICATIONS:

- 7'2 x 22 9/16" x 2 9/16"
- 3 Futures Fins 
- PU/poly construction
- 48.49L

WAVE HEIGHT:

- Ankle to Shoulder High

SKILL LEVEL: 

- Beginner to Advanced

No matter if the waves are big or small or your take off is early or late, this all around cruiser packs a surprising punch adapting to all sorts of conditions. From the rounded nose through the low rocker to the rounded pin tail this midlength board provides smooth glides and fast turns. Added volume under the chest makes for easy paddling that helps to catch more waves.

Outline: The longboard in the front. shortboard in the back outline with a vee tail that starts tapering 2/3 of the way through the board turns on a dime. The rounded nose allows you to ride towards the front of the board which stays pretty flat through the low rocker to provide speed down the line.

Rocker: The low rocker gives the board plenty of contact with the water to maintain speed countered by a subtle lift in the tail for fast transitions.

Bottom Contours: A flat entry turns to a slight vee that becomes more pronounced out the tail will give the rider ample control for rail to rail transitions.

Tail: The rounded pin tail has a nice amount of kick to it to provide additional speed and fast transitions.

• Core: PU
• Construction: PU
• Glass: 6x4x4/6x4
• Finish: Gloss

SPECIFICATIONS:

- 7'6" x 22 3/8" x 3 1/16"
- 2 + 1 Futures Fins
- PU/poly construction
- Pintail
- 55.67 L

WAVE HEIGHT:

- Ankle to Shoulder High

SKILL LEVEL: 

- Beginner to Advanced

The Summertime features a low nose entry rocker for easy paddling and trimming down the line. It has a single concave bottom with a pulled in squash tail that allows the rider to surf off the tail. It also features a wider nose than your normal fun board which gives you the ability to ride the nose. The Summertime is a great for all conditions from those smaller summer days to overhead surf. This is a must have board for your your quiver!

Outline: A rounded nose and a wider body than your classic funboard give this board plenty of stability with a nice sized sweet spot. The wide point is pushed far forward for a lot of stability. The rails taper in nicely to a thumb tail that's a combination of a squash and round tail.

Rocker: The low rocker is flat enough for nose rides. offers great stability. and plenty of lift to reduce pearling. It's going to help get you into a lot of waves.

Bottom Contours: A single concave all the way through the board gives you plenty of bite for a nice. controlled cruise.

Tail: The thumb tail provides just enough hold leaning more towards a fast and loose feel.

• Core: PU
• Construction: PU
• Glass: 6x6x4/4x4x4
• Finish: Sanded Matte

SPECIFICATIONS:

- 7'6 x 22 7/8" x 2 5/8"
- 3 Futures Fins
- PU/poly construction
- 52.81L

WAVE HEIGHT:

- Ankle to Shoulder High

SKILL LEVEL: 

- Beginner to Advanced

The Summertime features a low nose entry rocker for easy paddling and trimming down the line. It has a single concave bottom with a pullled in squash tail that allows the rider to surf off the tail. It also features a wider nose than your normal fun board which gives you the ability to ride the nose. The Summertime is a great for all conditions from those smaller summer days to overhead surf. This is a must have board for your your quiver!

Outline: A rounded nose and a wider body than your classic funboard give this board plenty of stability with a nice sized sweet spot. The wide point is pushed far forward for a lot of stability. The rails taper in nicely to a thumb tail that's a combination of a squash and round tail.

Rocker: The low rocker is flat enough for nose rides. offers great stability. and plenty of lift to reduce pearling. It's going to help get you into a lot of waves.

Bottom Contours: A single concave all the way through the board gives you plenty of bite for a nice. controlled cruise.

Tail: The thumb tail provides just enough hold leaning more towards a fast and loose feel.

• Core: PU
• Construction: PU
• Glass: 6x4x4/6x4
• Finish: Gloss

SPECIFICATIONS:

- 7'6 x 22 7/8" x 2 5/8"
- 3 Futures
- PU/poly construction
- Futures fins
- 52.81L

WAVE HEIGHT:

- Ankle to Shoulder High

SKILL LEVEL: 

- Beginner to Advanced

The Pickupstick “mid size” shape perfectly fills the gap between a shortboard and a longboard with a little extra short board performance focus. A smooth flowing shape and rocker combined with a single to double to flat tail contour for high performance shortboard style maneuvers and a concave for nose riding lift, refined but forgiving rails and great volume all add up to non stop wave catching performance/fun. Whether you are first timer looking for a board that will be easy to progress on, a weekend warrior that is looking for maximum wave time or if you are a ripper looking for that “transition period” mid sized fun/performance option that takes an average day and makes it special, the Pickupstick is always a perfect choice. 

*Fins NOT Included

WAVE HEIGHT:

- Ankle to Shoulder High

SKILL LEVEL:

- Beginner to Advanced 

SPECIFICATIONS: